Manualshelf

Owner manual

ManualsBrandsZOLL ManualsHealth and hygieneE Series Monitor Defibrillator Rev D
131132133134135136137138139140
E Series Service Manual
5-24 9650-1450-01 Rev. D
Battery Interconnect Board Removal
1. Remove the 3 machine screws from the battery pins (J100,
J101, J102).
2. Remove the 2 screws securing the board.
3. Gently remove board by lifting from this end. 4. Disconnect flat cable by pulling gently.
Note: Slightly lifting up on the charger assembly will allow for easier
removal.