Users Guide Instruction Manual

P/N 11440-001 Rev. 3 Page 3-21
User Guide
3.8.1 Information Upload Procedure
1. Turn on your PC (the host computer).
2. Start the Code Review software.
Figure 3-18 Main Menu
3. Power up the AutoPulse and when the initialization is complete press the Menu/Mode Switch button
and then select the “Enter Comm. Mode” option from the Main Menu. Alternatively you may enter
directly into the Communication Mode by depressing the Menu/Mode Switch button as you power
up the platform.
Figure 3-19 Infrared Communication Set-up
30:2
MENU
Enter Comm Mode
View Last Patient Info
View Platform Info
View Battery Info
exit
Computer Infrared
Communication Adapter
AutoPulse Platform
Infrared Communication Port