Users Guide Instruction Manual

Page 3-10 P/N 11440-001 Rev. 3
User Guide
Figure 3-10 Verifying Patient Alignment Display Panel Screen
4. After the 3 second verify patient alignment pause is complete, compressions will automatically
begin. You may press the Start/Continue button to immediately initiate compressions ahead of that
time.
Warning:
• Do not lean on the patient after pressing the Start/Continue button.
• If you must move or realign the patient, you must press the Stop/Cancel button before
adjustment.
• Do not place your hands or any other objects on or under the LifeBand while the AutoPulse
is analyzing the patient or during active operation.
3 0
:
2
STOP START
Check
p
a tient a li
g
nment.