Users Guide Instruction Manual

P/N 11440-001 Rev. 3 Page 1-5
User Guide
Figure 1-4 User Control Panel
1.4.2.1 Start/Continue Button
1.4.2.2 Stop/Cancel Button
The green Start/Continue button is active when “Start” or “Continue” appears on
the display panel above the button and its green LED is illuminated.
Use the Start/Continue button to start or continue:
• Analyzing patient size
• Chest compressions
The orange Stop/Cancel button is active when “Stop”, “Quit”, “No Realign” or
“Cancel” appears on the display panel above the button and its orange LED is
illuminated.
Use the Stop/Cancel button to stop or cancel:
• Analyzing patient size (see Figure 3-9)
• Chest compressions (the AutoPulse releases the tension on the LifeBand)
(see Figure 3-11)
• Verify patient alignment pause (see Figure 3-10)
Stop/Cancel
Stop/Cancel LED
Tone Mute
Decrease Contrast
Increase Contrast
Move Up
Select Choice
Move Down
Menu/Mode Switch
Start/Continue
Start/Continue LED
Display Panel
Alert LED (red)
Power
LED (green)