Operation Manual

The Siphon

To make avored core pops, follow the instructions

below that correspond with the illustration on the right.

A) Pour your shell avor up to the ll line and wait until

you see the outer shell freeze (1–4 min). The longer

you wait, the thicker the shell will be.

B) Remove the remaining juice from the Quick Pop™

Maker by inserting the siphon and squeezing to

extract the juice.

C) Pour the core avor into the mold.

D) Wait until the pop freezes, then remove it and enjoy!

NOTE: The siphon also comes in handy when lling

The Quick Pop™ molds at sharp angles (see pg. 13).