Spec Sheet

© Copyright 2014 Zoeller Co. All rights reserved.
SECTION: 2.20.007
FM2419
0214
Supersedes
1109
SUBMERSIBLE PUMP
DEWATERING (SUMP)
PASSES 3/8" SPHERICAL SOLIDS
1½" NPT Discharge
COMPARE THESE FEATURES
MOTOR:
115 Volts, single phase, 60 Hz, ¼ HP, 3.8 amps, 3450
RPM, oil-lled, hermetically sealed, automatic reset
thermal overload protected.
MOTOR HOUSING:
Rugged cast iron motor housing with rust resistant baked-
on enamel nish.
Efcient heat sink for heat dissipation.
BASE/PUMP HOUSING:
Glass-lled polypropylene with no screen.
Passes 3/8" spherical solids.
IMPELLER:
Non-Clog vortex impeller, engineered glass-lled
thermoplastic with metal insert.
POWER CORD:
UL Listed 9 ft., 3-wire cord and plug.
SWITCH:
Reliable tethered oat switch.
SEALS:
Carbon & ceramic rotary seal.
Watertight neoprene seal between motor and cover.
FASTENERS:
Stainless steel screws and hardware.
TEMPERATURE RATING:
104°F (40°C).
CYCLE:
On point: 11-1/4" • Off Point - 4-1/8"
DIMENSIONS:
Maximum width: 8-3/32" • Height: 10-1/2"
Weight: 11.0 lbs • Fits 12" Diameter Pits.
100% Factory Tested After Assembly
R
227875
Certied to CSA
Standard C22.2 No. 108
49 Cast Iron Series
Available Model:
Automatic only
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
visit our web site:
www.zoeller.com
®
Your Peace of Mind is Our Top Priority
®