Specification Sheet

ManualsBrandsZoeller ManualsAll ZoellerZoeller Preassembled 24" x 24" Sewage System

SECTION: 2.45.065

FM2810

0518

Supersedes

0814

TECHNICAL DATA SHEET

912 PACKAGE SYSTEMS

PREASSEMBLED SEWAGE SYSTEMS FOR FAST INSTALLATION.

PUMP SPECIFICATIONS

MOTOR

Voltage 115

Phase 1

Hertz 60

RPM 1400 or 2800

Type Split phase or permanent split capacitor

Insulation Class B

Amps 4.4 - 8.5

PUMP

Operation Automatic

Auto On / Off Varies based on package

Discharge Size 2" NPT

Solids Handling 2" (50 mm) spherical solids

Cord Length 20' (6 m) standard

Max. Head 14' (4.3 m), 22" (6.7 m), 45.6' (13.9 m)

Max. Flow Rate

92 GPM (20.9 m

/hr), 106 GPM (24 m

/hr),

149 GPM (33.8 m

/hr)

Max. Operating Temp. 130 °F (54 °C)

Cooling Oil lled

Motor Protection Auto reset thermal overload

MATERIALS

Cap Cast iron

Motor Housing Cast iron

Pump Housing Cast iron

Base Engineered plastic or cast iron

Upper Bearing Sleeve bearing

Lower Bearing Sleeve or ball bearing

Mechanical Seals Carbon/ceramic

Impeller Type Non-clogging vortex

Impeller Engineered plastic or bronze

Hardware Stainless steel

Motor Shaft

1215 cold rolled steel, 1144 steel or JIS

S45C steel

Gasket Neoprene

Product information presented

here reﬂects conditions at time

of publication. Consult factory

regarding discrepancies or

inconsistencies.

BASIN SPECIFICATIONS

• Polyethylene basin

• Polyethylene structural foam cover with 2" vent and 2" discharge

• 41 gallon (155 liter) capacity (25 gallons [95 liters] below inlet)

• Integral foam seal

SK2694

8” (20.4 cm)

26-1/2”

(67.4 cm)

25-5/8” (66.0 cm)

28” (71.2 cm)

24" x 24" (61 x 61 cm) shown, 18" x 30" (46 x 76 cm)

and 24" x 36" (61 x 91 cm) also available.

502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | zoellerpumps.com

These systems are not designed

for hazardous environments. Please consult

factory for special options and requirements.

Summary of content (4 pages)

PAGE 1
SECTION: 2.45.065 FM2810 0518 Supersedes 0814 Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. TECHNICAL DATA SHEET 912 PACKAGE SYSTEMS PREASSEMBLED SEWAGE SYSTEMS FOR FAST INSTALLATION. MATER IALS PUMP MOTOR PUMP SPECIFICATIONS Voltage 115 Phase 1 Hertz 60 RPM 1400 or 2800 Type Split phase or permanent split capacitor Insulation Class B Amps 4.4 - 8.
PAGE 2
60 227 23 87 18 ft.(5.5m) 85 322 45 170 20.5 ft.(6.2m) 15 4 15 4 10 2 10 2 5 5 266 264 211 266 264 211 0 20 0 GALLONS LITERS 0 CAUTION 20 6 20 6 FEET METE METERS Meters Gal. Liters Gal. Liters Gal. Liters 1.5 310 341 435 211 82 264 90 266 115 53 201 60 227 10 3.0 85 322 Meters Gal. Liters Gal. Liters Gal. 32 121 23 87 Liters45 15 4.6 170 1.5 90 115 435 82 310 341 19.5 ft.(5.9m) 18 ft.(5.5m) Shut-off Head: 20.5 ft.(6.2m) TOTAL DYNAMIC HEAD Feet 53 201 32 121 19.5 ft.(5.
PAGE 3
2" Vent P/N 3" Vent P/N Basin Size Weight Lbs / Kg PSF-Standard 18" X 30" (45.7 x 76.2 cm) 39 / 18 Polyethylene 24" x 24" (61 x 61 cm) 50 / 23 Polyethylene w/ Alarm 24" x 24" (61 x 61 cm) 54 / 24 PSF-Standard 18" X 30" (45.7 x 76.2 cm) 56 / 25 Pump Basin Type 912-0073 --- * 912-0112 --- * 912-1112 --- 912-0007 912-0021 912-1007 --- PSF-Standard w/ Alarm 18" X 30" (45.7 x 76.2 cm) 59 / 27 912-0006 --- Polyethylene-10' (3 m) stack 18" X 30" (45.7 x 76.
PAGE 4
Side Discharge Basins P/N Pump Basin Type Basin Size Weight Lbs / Kg 912-0082 PSF 18" X 30" (45.7 x 76.2 cm) 61 / 28 912-1082 PSF w/ Alarm 18" X 30" (45.7 x 76.2 cm) 66 / 30 72 / 33 M264 912-0090 Premium PSF w/ AFD 18" X 30" (45.7 x 76.2 cm) 912-1090 Premium PSF w/ AFD & Alarm 18" X 30" (45.7 x 76.2 cm) 72 / 33 912-0083 PSF 18" X 30" (45.7 x 76.2 cm) 62 / 28 PSF w/ Alarm 18" X 30" (45.7 x 76.2 cm) 67 / 30 Premium PSF w/ AFD 18" X 30" (45.7 x 76.