Product Overview

ManualsBrandsZoeller ManualsGrinder PumpsZoeller The Shark 2HP Automatic Single Directional Grinder Pump

SECTION: 2.50.010

FM1478

0609

Supersedes

0807

FEATURES:

•

Automatic with Integral Control, Nonautomatic available.

• UL Listed.

• Durable Heavy Duty Finned Cast Iron Construction.

• Legs provide for free standing installation.

• Motor - 2 HP, 60 Hz, 3450 RPM, Oil-ﬁ lled, Hermetically

Sealed with Class B Insulation, Automatic Reset Thermal

Overload Protected.

• Upper and Lower Ball Bearings Running in Bath of Oil.

• Hardened Stainless Steel Cutter and Disc.

• Cutters Protected from Abrasive Solids.

• Stainless Steel Lifting Handle, Screws, and Bolts.

• Easily adapts to Rail Systems.

• Mechanical Shaft Seal - Carbon/Ceramic.

• Control panels are not required.

• Simplex Grinder Package Systems (Unassembled and Job

Ready/Assembled) available.

• Corrosion resistant powder coated epoxy ﬁ nish.

• Maximum operating temperature 130°F (54°C).

• 20' Power Cord.

Product may not be exactly as pictured.

WD820/WH820

AUTOMATIC

E820/I820

NONAUTOMATIC

UNIQUELY DESIGNED PUMP

WITH INTEGRAL CONTROL

(For Pump Preﬁ x Identiﬁ cation see News & Views 0052)

Product information presented

here reﬂ ects conditions at time

of publication. Consult factory

regarding discrepancies or

inconsistencies.

MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347

SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961

(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624

visit our web site:

www.zoeller.com

Tested to UL

Standard UL778

(Tested to UL778 and

CSA22.2 108 Standards)

Summary of content (4 pages)

PAGE 1
SECTION: 2.50.010 Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. FM1478 0609 Supersedes 0807 visit our web site: www.zoeller.com MAIL TO: P.O.
PAGE 2
GRINDER SYSTEMS (A) (A) GRINDER MODEL 820 STANDARD FEATURES: • 1¼" NPT Vertical discharge • Carbon/Ceramic Seal • Thermal Overload protection • Engineered, glass-filled plastic impeller with Stainless Steel insert • Stainless Steel Cutter Plate/Cutter • Stainless Steel Shaft • Stainless Steel Hardware • 20' Power Cord OPTIONS: Extra Length Cords (Consult Factory) 820 GRINDER 2 HP, 1¼" N.P.T. VERTICAL DISCHARGE P/N WGT. MODEL VOLTS PH MODE AMP 820-0011 89 WD820* 230 1 Auto 13.
PAGE 3
(F) INDOOR BASIN, COVER, AND HARDWARE - PREPACKAGED STANDARD EQUIPMENT • Fiberglass Basin (I) BALL VALVE PUMP NOT INCLUDED • Rust Resistant Steel Cover (epoxy coated) • Inspection Plate HIGH WATER ALARM (FIELD INSTALLED) TO ALARM PANEL 1 1/4" FEMALE NPT CAST IRON CHECK VALVE (FIELD INSTALLED) • Pump Cover • 3" Adaptaflex Vent Seal 1 1/4" PVC SLIP X SLIP BALL VALVE (FIELD INSTALLED) 1¼" IPS P/N 30-0165 1½" IPS P/N 30-0166 2" IPS P/N 30-0167 WGT. 2.0 WGT. 2.0 WGT. 2.
PAGE 4
PREPACKAGED AND JOB READY SYSTEMS OUTDOOR INDOOR P/N P/N P/N ___________ (A) ___________ (B) 10-0689 ___________ (C) 10-0666 P/N ___________ (E) P/N ___________ (F) REQ.