Specification Sheet
SK1691
(A) GRINDER PUMP STANDARD FEATURES:
• Tri-slice
®
two-bladed, high-torque cutter
• Scissor-style cutting action cuts solids down to 7/32"
and smaller
• 1-1/4" NPT vertical discharge
• Carbon/ceramic seal
• Thermal overload protection
• Engineered, glass-filled plastic impeller with
stainless steel insert
• Stainless steel cutter and plate
• Stainless steel motor shaft
• Stainless steel hardware
• 20' (6 m) power cord
Options:
Extra length cords
____ 25' ____ 35' ____50'
(B) CONTROL PANELS & ALARM SYSTEMS
STANDARD PANEL FEATURES:
• NEMA 4x
• Hand-Off-Automatic (H.O.A.) selector switch
• Lockable hasp
• Audible and visual high water alarm switch with
silent switch
• Dry contacts
• Test switch for alarm and light
• UL listed
SIMPLEX PANELS: (For use with non-automatic pumps)
P/N 10-4465 1 Ph, 7.0-15.0 Amps
P/N 10-1078 3 Ph, 2.5-4.0 Amps, 200-460 V
P/N 10-1080 3 Ph, 4.0-6.3 Amps, 200-460 V
P/N 10-1082 3 Ph, 6.0-10.0 Amps, 200-460 V
P/N 10-1083 3 Ph, 9.0-14.0 Amps, 200-460 V
P/N 10-1134 3 Ph, 2.5-4.0 Amps, 575 V
DUPLEX PANELS: (For use with non-automatic pumps)
P/N 10-4464 1 Ph, 7.0-15.0 Amps
P/N 10-1106 3 Ph, 2.5-4.0 Amps, 200-460 V
P/N 10-1108 3 Ph, 4.0-6.3 Amps, 200-460 V
P/N 10-1110 3 Ph, 6.0-10.0 Amps, 200-460 V
P/N 10-1111 3 Ph, 9.0-14.0 Amps, 200-460 V
P/N 10-1156 3 Ph, 2.5-4.0 Amps, 575 V
HIGH WATER ALARMS: (For use with automatic pumps)
All alarms come with 15' variable level float switch.
P/N 10-0412 indoor only
P/N 10-0623 indoor/outdoor
P/N 10-0126 indoor/outdoor w/ dry alarm contacts
(C)
FLOAT SWITCHES
• 3 float switches required for simplex applications
• 3 or 4 float switches required for duplex applications
• Weight optional for high water alarms
P/N 10-0744 Float switch w/ 20' cord
P/N 10-1878 Float switch w/ 35' cord
P/N 10-1879 Float switch w/ 50' cord
P/N 10-0689 Weight only
(D)
JUNCTION BOXES (optional)
SIMPLEX SYSTEM:
P/N 10-0579 Qwik Box, 115 Volt, 15 Amp Max.
P/N 10-0580 Qwik Box, 230 Volt, 20 Amp Max.
P/N 10-0647 For 3-float outdoor package
DUPLEX SYSTEM:
P/N 10-0648 For 3-float systems
P/N 10-0649 For 4-float systems
(E) PREPACKAGED INDOOR SYSTEM
STANDARD EQUIPMENT
• Fiberglass basin w/ fiberglass anti-flotation ring
• Rust-resistant steel cover (epoxy coated)
• Inspection plate
• Pump access cover (2) for duplex
• (1) 3" Adaptaflex vent seal
• (1) 1-1/4" Adaptaflex discharge pipe seal
• Cord seal
• (1) 4" Adaptaflex inlet pipe seal (field-installed)
• Pump support hardware
• 1-1/4" NPT cast iron check valve (2) for duplex
• 1-1/4" PVC Ball valve (2) for duplex
SIMPLEX SYSTEM:
P/N 32-0011 Automatic models
24" x 36" Fiberglass w/ inspection plate
DUPLEX SYSTEM:
P/N 32-0009 30" x 36" Fiberglass w/ 3 float
inspection plate
P/N 32-0010 30" x 36" Inspection plate basin w/
4 float inspection plate
PUMP SYSTEM COMPONENTS
© Copyright 2018 Zoeller
®
Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | zoeller.com
TYPICAL SIMPLEX INDOOR SYSTEM
PREPACKAGED AND JOB READY SYSTEMS - INDOOR
REQ.
Grinder (auto or nonauto) P/N _____________________ (A)
Control Panel or alarm P/N _____________________ (B)
Floats and weights P/N _____________________ (C)
Junction Box (optional) P/N _____________________ (D)
Basin, cover and hardware P/N _____________________ (E)
SILENCE
INPUT 1
POWER
ON
(FIELD INSTALLED)
ALARM
4" RUBBER INLET
PUMP SUPPORT
HARDWARE
OFF
24" NOMINAL
TO ALARM PANEL
BALL VALVE
(FIELD INSTALLED)
GALVANIZED PIPE
1-1/4"
GALVANIZED PIPE
1-1/4"
2HP AUTOMATIC
GRINDER PUMP
1-1/4" GROMMET SEAL
(FIELD INSTALLED)
CAST IRON CHECK VALVE
1-1/4" FEMALE NPT
36"
1-1/4" PVC SLIP X SLIP
OPTIONAL HIGH WATER ALARM
(FIELD INSTALLED)
PIPE SEAL