Product Overview

© Copyright 2012 Zoeller Co. All rights reserved.
GRINDER SYSTEMS
(A) 810 & 815 PROGRESSING CAVITY GRINDER
1 OR 2 HP
1¼" N.P.T. DISCHARGE
P/N WGT. MODEL VOLTS PH HP AMP
 810-0004
88 E810 230 1 1 7.0
 815-0004
91 E815 230 1 2 10.5
QWIK BOX w/ FLOAT SWITCH
PLUGGER PANEL
(B) ALARM PANEL
 P/N 10-0623 Indoor/Outdoor
high water alarm with 15' con-
trol switch.
 P/N 10-0126 NEMA 4X high wa-
ter alarm with 15' control switch
and dry contact.
 P/N 10-1494 Indoor high water
alarm with 15' control switch.
(C) PUMP SWITCH & WEIGHT -
1 pump switch required
Single piggy-back type 230 volt 13
amp
 P/N 10-0035 with 15' cord
 P/N 10-0689 weight for alarm
oat (Indoor Systems only)
(D) JUNCTION BOX -
1 required
 P/N 10-0580 Qwik-Box, NEMA 4X
with 230 volt receptacle
(B) CONTROL PANEL
 P/N 10-2006 Plugger panel,
NEMA 4X with high water alarm
and 230 volt receptacle.
(C) FLOAT SWITCHES -
2 required
Pump: One pump switch
Alarm: One control switch
 P/N 10-0706 piggy-back pump
switch with 20' cord
 P/N 10-0311 piggy-back pump
switch with 25' cord
 P/N 10-1956 piggy-back pump
switch with 35' cord
 P/N 10-0744 mechanical control
switch with 20' cord
 P/N 10-1877 mechanical control
switch with 25' cord
 P/N 10-1878 mechanical control
switch with 35' cord
(D) JUNCTION BOX
J-Box not recommended with this
type control.
SIMPLEX PANEL
(B) CONTROL PANEL
 P/N 10-1212 Simplex panel,
NEMA 4X, with high water
alarm and pump circuit breaker,
less oat switches.
(C) FLOAT SWITCHES -
2 required
Pump: One pump switch
Alarm: One control switch
 P/N 10-0706 piggy-back pump
switch with 20' cord
 P/N 10-0311 piggy-back pump
switch with 25' cord
 P/N 10-1956 piggy-back pump
switch with 35' cord
 P/N 10-0744 mechanical control
switch with 20' cord
 P/N 10-1877 mechanical control
switch with 25' cord
 P/N 10-1878 mechanical control
switch with 35' cord
(D) JUNCTION BOX -
optional
 P/N 10-2145 NEMA 4X with
3 cord seals and conduit
connection.
ELECTRICAL - CONTROL / ALARM / FLOATS / JUNCTION BOX (SELECT 1 OF THE 3 COLUMNS)
(A) GRINDER
STANDARD FEATURES:
• 1¼" NPT Discharge
• Carbon/Ceramic Tandem Seals
• Thermal Overload protection
• Hydraulic SS Rotor and Buna-n Stator
• Stainless Steel Cutter Plate / Cutter
• Stainless Steel Shaft
• Stainless Steel Hardware
• Corrosion resistant powder coated epoxy paint
• 20 ft. Power Cord Cord
OPTIONS:
 25' Long Cords
 35' Long Cords
 50' Long Cords
Maximum operating temperature 130°F (54°C).
Note: All variable level oat switches in this section are
mechanically activated and do not contain mercury.
To ensure proper pump operation, a swing or apper
style check valve must be installed in the pump discharge line. A
faulty or non-functional check valve when combined with a pressure
sewer may prevent the pump from starting.