Specification Sheet

SECTION: 2.65.020

FM2806

1114

Supersedes

0814

TECHNICAL DATA SHEET

Battery Backup Pedestal Sump Pumps

PRODUCT SPECIFICATIONS

Complies with

ASME A112.3.4

and CSA B45.9.

• Heavy duty 12V motor and positive contact ﬂoat switch

• Discharges water as fast as many 1/3 HP primary pumps

• Minimum pit requirements: 18" x 22" (46 x 56 cm)

The complete Aquanot

II system includes the pump, the electronic

charger and a 12 V pump alarm. (You may purchase the deep-cycle

battery and battery box separately.)

Aquanot

II comes with these electronic charger features:

• 28.0 amp battery charger

• LED status indicators

• Automatic battery recharging

• Microprocessor controlled

• 7.0 amp AC input

• 12 V DC output

Aquanot

Battery:

• Size 31 “Wet” No. 10-0761 (69 lbs / 31 kg),

200-minute reserve capacity

• Size 27 “AGM” No. 10-1450 (66 lbs / 30 kg),

175-minute reserve capacity

• Minimum battery requirements deep cycle,

size 27, 175-minute reserve capacity

SK1776

NOTE: This product is not intended for use as a primary water removal unit.

Product information presented

here reects conditions at time

of publication. Consult factory

regarding discrepancies or

inconsistencies.

Your Peace of Mind is Our Top Priority

502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com