Product Overview

ManualsBrandsZoeller ManualsAll ZoellerZoeller 12 V Submersible Battery Back-Up Sump Pump System

Model 98

Features

The "Flow-Mate" series of submersible pumps is designed for use in residential

or light commercial dewatering applications and can be used to transfer

groundwater or effluent. These durable cast iron pumps include a powder

coated epoxy finish to prevent corrosion, and are designed to provide great heat

dissipation from the motor, ensuring a long service life. As with every Zoeller

pump, each one is 100% pressure-tested, submerged and run to ensure quality

and reliability for years of trouble-free performance! This attention to detail is an

inherent feature of every pump in this series, making it one of the most reliable

in the industry.

Automatic models include a float-operated, NEMA 6, 2-pole mechanical

switch, a stainless steel float guard and switch arm, and a solid, buoyant

polypropylene float, which prevents water from filling the float and causing a

malfunction.

For nonautomatic pumps, variable level control systems and containers of

various sizes are available for longer cycles.

Includes a stainless steel handle for easy installation and removal.

All models are hermetically sealed to be watertight, dust-tight, and completely

submersible.

Specifications

Motor Characteristics

Horse Power 0.77 KW

Voltage 220 V

Phase 1 Ph

Hertz 50 Hz

RPM 1400 RPM

Type Permanent split capacitor

Insulation Class B

Amps 4.7 Amps

Pump Characteristics

Operation Automatic or nonautomatic

Auto On/ Off Points 24 cm / 8 cm (9-1/2" / 3")

Discharge Size 1-1/2" NPT

Solids Handling 12 mm (1/2") spherical solids

Cord Length 3 m (9') standard

Cord Type SOW/SOOW (CE model H07RN-F)

Max Head 4.9 m (16')

Max Flow Rate 12.7 m3/hr (56 GPM)

Max Operating Temp 54°C (130°F)

Cooling Oil filled

Motor Protection Auto reset thermal overload

Materials Characteristics

Cap Cast iron

Motor Housing Cast iron

Pump Housing Cast iron

Base Cast iron

Upper Bearing Sleeve bearing

Lower Bearing Sleeve bearing

Mechanical Seals Carbon and ceramic

Impeller Type Non-clogging vortex

Impeller Engineered plastic

Hardware Stainless steel

Motor Shaft AISI 1215 steel

Gasket Neoprene

FM2709_Eb

Section W2.20.070

Updated 0313

Supersedes 1011

Summary of content (2 pages)

PAGE 1
Model 98 Specifications Motor Characteristics Horse Power 0.77 KW Voltage 220 V Phase 1 Ph Hertz 50 Hz RPM 1400 RPM Type Permanent split capacitor Insulation Class B Amps 4.7 Amps Pump Characteristics Features The "Flow-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent.
PAGE 2
Model 98 Model Model Number Seal Mode Volts Phase Amps KW (p1) Hz Kg Lbs U98 Single Auto 220 1 4.7 0.77 50 16 35 V98 Single Non 220 1 4.7 0.77 50 16 35 Additional cord lengths are available in 8 m (25'), 11 m (35') and 15 m (50'). Power cords less than 10 m (33') on CE rated models are intended for indoor use only. All models are availabe with a type E/F (5 or 10 m), G (2 or 10 m) or I (5 m) plug. Optional pump stand (P/N/10-2421).