Part List

16-1/8" (410 mm)
4-5/32" (106 mm)
3-29/32" (99 mm)
4-5/8"
6-5/16"3-7/8"
1-1/2" NPT
(98 mm)
(117 mm)
(160 mm)
12-13/32" (315 mm)
1-1/2" NPT
4-5/32" (106 mm)
3-29/32" (99 mm)
4-5/8"
6-5/16"3-7/8"
(98 mm)
(117 mm)
(160 mm)
SECTION: 2.15.070
FM2783
0419
Supersedes
0617
TECHNICAL DATA SHEET
FLOW-MATE SERIES
Models 140/4140, 145/4145 Euent /Dewatering Pumps
SK1524
SINGLE SEAL
DOUBLE SEAL
PRODUCT SPECIFICATIONS
MOTOR
Horse Power 3/4 - 1
Voltage 115 or 230
Phase 1 Ph
Hertz 60 Hz
RPM 3450
Type Permanent split capacitor
Insulation Class B
Amps 6.0 - 13.0
PUMP
Operation Automatic or nonautomatic
Discharge Size 1-1/2" NPT
Solids Handling 1/2" (12 mm), 3/4" (19 mm) spherical solids
Cord Length 20' (6 m)
Cord Type UL listed, neoprene cord
Max. Head 50' (15.2 m) or 74' (22.6 m)
Max. Flow Rate 86 GPM (326 LPM) or 61 GPM (232 LPM)
Max. Operating Temp. 130 °F (54 °C)
Cooling Oil lled
Motor Protection Auto reset thermal overload
MATERIALS
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Cast iron
Upper Bearing Sleeve bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type
Single vane (145)
or non-clogging vortex (140)
Impeller Engineered thermoplastic
Hardware Stainless steel
Motor Shaft JIS S45C steel
Gasket Neoprene
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
R
Certied to CSA
Standard 227875
NOTE: See model comparison chart for specific details.
© Copyright 2019 Zoeller
®
Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | zoellerpump.com