Product Overview

SUMP/SEWAGE BASINS
CONSULT FACTORY FOR LARGER SIZE BASINS OR SPECIAL APPLICATIONS.
Products may not be exactly as pictured.
NOTE: Polyethylene basins should be used for indoor installations only.
SECTION: 3.10.030
FM0487
1110
Supersedes
0309
• Available in high density polyethylene structural foam (PSF), polyethylene or
fi ber glass
• Ideal for residential, commercial and industrial applications
• Complete with necessary sealing hardware and fl anges
• Available with 2" or 3" vent and 2" or 3" discharge
• Lid with gasket and 4" cast iron inlet hub with anticorrosion coating are included
with the sewage basins
• Centerline of hub is located 10½" from top of basin (std.). Custom locations
available
• Polyethylene sewage pump basins are IAPMO approved. For 10' stack test
models, refer to charts on pages 2 and 3
• Sealed (Radon) basins for sump pumps in 18" x 22" and 18" x 30" sizes
• Polyethylene sump basin available with plastic unsealed covers in 18" x 22"
• Sewage basins are watertight and gastight when properly in stalled
• Durable steel cover with gasket standard on simplex and duplex sewage basins
• One piece, seamless construction on all basins
• Duplex covers include two pump plates and in spec tion plate
• Ready to install for economical and simple installation
• Dimensional Engineering data available
• Temperature rated 130°F
• Fiberglass models available that will pass the 10' water stack test (Refer to
charts on pages 2 and 3) (L. A. - RR-5311)
• Various custom diameters & lengths available in fi ber glass, consult factory. Also
with 10' water stack test.
COMPARE THESE FEATURES
© Copyright 2010 Zoeller Co. All rights reserved.
18" SUMP BASIN COVERS AND EXTENSIONS
Product information presented
here re fl ects con di tions at time
of publication. Consult factory
re gard ing dis crep an cies or
in con sis ten cies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
visit our web site:
www.zoeller.com
SIMPLEX SEWAGE BASIN
SUMP AND RADON BASINS
SEWAGE BASINS
P/N 31-1608
18" x 30" Premium Basin with Split Cover, AFD, Torque Stops, Black.
18" x 22" Heavy Duty Polyethylene, no inlet hole and hub (P/N 31-0444).
18" x 22" Radon basin with inlet and hub (P/N 31-0251).
18" x 30" Poly, 4" inlet-grommet (loose), no inlet hole. Includes one-piece
blank poly cover w/cord seal (P/N 31-1855).
One Piece, Polyethylene with 1 ½"
Discharge and Cord Grommet.
P/N 17-0294
One Piece, Polyethylene
Molded with 3" x 13" Open ing.
P/N 17-0135 P/N 17-0131
One Piece, Steel with 3" Vent, 1½"
Dis charge, and Cord Grommet
(Ra don Lid).
Basin Extensions, for use with PSF 18"
diameter basins:
31-1476 - 6" riser extension w/ hardware.
31-1473 - 12" riser extension w/ hardware.
P/N 31-1476