Spec Sheet

© Copyright 2014 Zoeller Co. All rights reserved.
®
The “Combo”
• Full-ow check valve design
• Threaded union allows pump to be removed without
disrupting discharge piping.
• Saves time and money - easy to install
• Neoprene gasket and apper, weighted with stainless steel
backing plates and rivet
• Can be installed on vertical or horizontal pipe
• Meets plumbing codes requiring a ball valve installed in
conjunction with a check valve.*
30-0100
1½" PVC CHECK VALVE / BALL VALVE
UNION COMBINATION
30-0101
2" PVC CHECK VALVE / BALL VALVE
UNION COMBINATION
30-0102
1½" PVC CHECK VALVE
UNION COMBINATION
30-0103
2" PVC CHECK VALVE
UNION COMBINATION
30-0214 1¼" CAST IRON NPT
30-0215 1½" CAST IRON NPT
30-0216 2" CAST IRON NPT
30-0214
Pictured
HIGH-TEMPERATURE “FULL-FLOW” UNICHECKS
• Use with 2000 & 3000 series high-temperature pumps
• Vertical or horizontal installation
• Full-ow design, no restrictions
• Stops backow of water
• Standard, 1¼", 1½", 2" female NPT pipe
• EPDM strand-reinforced apper, smooth-edge
design, with cast iron and noncorrosive metal backing
plates & stainless steel fastener.
• Corrosion-resistant powder coated epoxy nish
• Rated at 50 PSI (115 feet of head) at 200°F
• Stainless steel bolts
• 1 per carton
• Weight: 30-0214, 7.5 lbs.; 30-0215, 7.5 lbs.;
30-0216, 10 lbs.
• All stainless steel screws
• Replaceable apper in the check valve
• Extra wide hinge to reduce stress
• Rated for 25 psi, 58 ft. of head
• 6 Per carton (30-0100 & 30-0101)
• 9 Per carton (30-0102 & 30-0103)
30-0100
Pictured
30-0101
Pictured
30-0102
Pictured
30-0103
Pictured
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
Your Peace of Mind is Our Top Priority
®
®
visit our web site:
www.zoeller.com
30-0238 1½" INLINE CHECK VALVE
• Rubber coupling with stainless steel clamps
• Threads into pump discharge
• Pre-drilled weephole
30-0238
Pictured
INLINE CHECK VALVE
• 4.3 PSI, 10 ft. of Head
• Vertical installation only
*Consult Factory or local representative for state approvals