Spec Sheet

30-0021 2" PLASTIC SLIP X SLIP UNIONS
30-0151 2" CAST IRON SLIP X SLIP UNIONS
30-0151
Cast Iron
30-0021
Pvc Plastic
THE “FULL-FLOW” UNICHECKS
SECTION: 4.10.100
FM0217
0414
Supersedes
0114
30-0160
Pictured
30-0152 2" CAST IRON NPT
30-0160 3" CAST IRON NPT
30-0163 1¼" CAST IRON NPT
30-0164 1½" CAST IRON NPT
• Vertical or horizontal installation
• Full-ow design, no restrictions
• Stops backow of water
• Standard, 1¼", 1½", 2", 3" female NPT pipe
• Neoprene polyester reinforced apper, smooth edge
design with cast iron and noncorrosive metal backing
plates & stainless steel fastener
• Corrosion-resistant powder coated epoxy nish
• Rated at 50 PSI (115 feet of head) at 130°F
• Stainless steel bolts
• 1 per carton
• Weight: 30-0163, 7.5 lbs.; 30-0164, 7.5 lbs.;
30-0152, 10 lbs.; 30-0160, 18 lbs.
• Suitable for installation below basin cover
30-0181 1¼" - 1½" SLIP X SLIP UNION
30-0200 1¼" - 1½" SLIP X SLIP UNION W/ SS SCREW & CLAMPS
• Flapper bends over a radius, no sharp 90° edges — lengthens life of apper hinge
• PVC plastic check body, ultrasonically welded and can be solvent welded for rigid pressure rated piping
systems to 25 PSI, 57 ft. of head at 130°F (30-0182)
• Slip x slip for 4.3 PSI, 10 ft. of head at 130°F. Avoid more than 10 ft. static head above the check valve.
• Vertical or horizontal installation
• Available in individual packages for pegboard display (30-0181)
• All stainless steel screws, nuts and clamps on model 30-0200 only
• Stainless steel clamps with zinc screws on model 30-0181 only
• Designed to reduce water hammer
• 10 per carton
Outside dimensions
6
5
/8" W x 6
5
/8" W x 8" H
• Flexible neoprene slip x slip union includes stainless
steel clamps for low pressure systems. Avoid more
than 10 ft. static head above the check valve. 4.3
PSI at 130°F
• Extra wide hinge to reduce hinge stress
• Plastic check has PVC body and can be installed
with solvent welded couplings for pressure systems
to 25 PSI, 57 ft. of head (P/N 30-0023)
• Model 30-0151 has corrosion-resistant
powder coated epoxy nish.
• Plastic check individual rack pack Model 30-0022
© Copyright 2014 Zoeller Co. All rights reserved.
Outside dimensions
5
1
/16" W x 4" W x 6 ¼" H
30-0163
Pictured
• Full 2" ow design - meets BOCA (P.604.2)
2" full ow pump code
• Checks backow of water and sewer gas
• Simple to install (no threading of pipe required). Save
time & material costs
• Neoprene gasket and apper, weighted with heavy
stainless steel metal backing plates and rivet
• Can be installed on vertical or horizontal line
• Slips over PVC, steel pipe or copper piping
• Reduces motor and pump noise from plumbing system
• 6 per carton
30-0181
Pictured
30-0200
Pictured
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
visit our web site:
www.zoeller.com
®
Your Peace of Mind is Our Top Priority
®
Consult Factory or local representative for state approvals