Product Overview

30-0021 2" PLASTIC SLIP X SLIP UNIONS
30-0151 2" CAST IRON SLIP X SLIP UNIONS
30-0151
CAST IRON
30-0021
PVC PLASTIC
THE “FULL-FLOW” UNICHECKS
SECTION: 4.10.100
FM0217
0705
Supersedes
1104
30-0160
Pic tured
30-0152 2" CAST IRON NPT
30-0160 3" CAST IRON NPT
30-0163 1¼" CAST IRON NPT
30-0164 1½" CAST IRON NPT
• Vertical or horizontal in stal la tion.
• Full fl ow design - no re stric tions.
• Stops backfl ow of water.
• Standard, 1¼", 1½", 2", 3" female NPT pipe.
• Neoprene polyester reinforced fl apper - smooth edge
design, with cast iron and noncorrosive metal backing
plates & stainless steel fastener.
• Corrosion resistant powder coated epoxy fi nish.
• Rated at 50 PSI (115 feet of head) at 130°F
• Stainless steel bolts.
• 1 per carton.
• Weight: 30-0163, 7.5 lbs.; 30-0164, 7.5 lbs.;
30-0152, 10 lbs.; 30-0160, 18 lbs.
• Suitable for installation below basin cover.
30-0181 / 30-0200 1½" or 1¼" SLIP X SLIP UN ION
• Flapper bends over a radius, no sharp 90° edges—lengthens life of fl apper hinge.
• PVC plastic check body, ultrasonically welded and can be solvent welded for rigid
pres sure rat ed pip ing systems to 25 PSI - (57 ft. of Head) at 130°F. (30-0182).
• Vertical or horizontal installation.
• Avail able in individual packages for pegboard display (30-0191).
• All stainless steel screws, nuts and clamps on model 30-0200 only.
• Slip x Slip for 4.3 PSI (10 ft. of Head) at 130°F. Avoid more than 10 ft. static head
above the check valve.
• Designed to reduce water hammer.
• 10 per carton.
Outside dimensions
6 5/8" W x 6 5/8" W x 8" H
stain less steel clamps for low pressure sys tems.
Avoid more than 10 ft. static head above the
check valve. 4.3 PSI at 130°F.
• Stainless steel screws.
• Extra wide hinge to re duce hinge stress.
• Plastic check has PVC body and can be
in stalled with solvent welded couplings for
pres sure sys tems to 25 PSI (57 ft. of Head).
(P/N 30-0023)
• Model 30-0151 has corrosion resistant
powder coated epoxy fi nish.
• Stainless Steel sleeves available to meet Illinois
plumb ing code. C.I. 30-0201 / PVC 30-0202.
• Plastic check individual rack pack Model
30-0022.
• 6 per carton.
© Copyright 2005 Zoeller Co. All rights reserved.
Outside dimensions
5 1/16" W x 4" W x 6 1/4" H
30-0163
Pic tured
Product information presented
here re fl ects con di tions at time
of publication. Consult fac-
tory re gard ing dis crep an cies or
in con sis ten cies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
visit our web site:
www.zoeller.com
• Full 2" fl ow design - meets BOCA (P.604.2)
2" Full Flow Pump Code.
• Checks backfl ow of water and sewer gas.
• Simple to install (no threading of pipe
required). Save time & ma te rial costs.
• Neoprene gasket and fl apper, weighted with
heavy stainless steel metal back ing plates and
stainless steel rivet.
• Can be installed on vertical or hori zon tal line.
• Slips over ABS, PVC, steel pipe or cop per
pip ing.
• Reduces motor and pump noise from plumbing
system.
• Meets requirements of Wis con sin Uniform
Plumbing Code.
• Flexible neoprene slip x slip union in cludes