Spec Sheet

© Copyright 2013 Zoeller Co. All rights reserved.
2” - 3” - 4” CAST IRON PLUG VALVES
Threaded Connection - 2” & 3”
Flanged Connection - 3” & 4”
Features:
• Designedtohandlesolidsbearingows
• Cast iron housing - rated 175 psi
• 99% pure nickel welded seat
• 1/4 turn Buna plug
• Upper and lower ball bearings
• Provided with hand lever
3” & 4” FLANGED CHECK VALVES
GENERAL CAUTION: Water hammer creates momentary high pressure surges. These surges can cause severe damage to check valves and the piping system. Consideration for water
hammer must be included in the piping system design. Reference ASPE Data Book, Chapter 2.33. May require check valves with special non-slam features or other engineered solutions.
THREADED MODELS
SIZE PART NUMBER WIDTH HEIGHT WEIGHT
2” 6030-0082 5-1/4” 7-1/8” 12 LBS.
3” 6030-0083 8-3/4” 14-1/8” 45 LBS.
FLANGED MODELS
SIZE PART NUMBER WIDTH HEIGHT WEIGHT
3” 6030-0085 8” 14-1/8” 53 LBS.
4” 6030-0086 9” 16-3/4” 66 LBS.
* Hand lever not shown in pictures.
* *
Features:
• Heavy-duty ductile iron construction
• Angled seal for non-slam closure
• Non-clog design
• Reinforced disc
• Drip tight seating
• Rated up to 250 PSIG
• Designed for both horizontal and
vertical usage
• Optionalbackowactuatorand
mechanical indicator
PART
NUMBER
PART
NAME
MATERIAL
1 Body Ductile iron ASTM A536, Grade 65-45-12
2 Cover Ductile iron ASTM A536, Grade 65-45-12
3 Disc Buna-N w/ steel and nylon reinforcement
4 Gasket Compressednonasbestosber
5 Cover Bolt Alloy steel SAE Grade 5
PART
NUMBER
VALVE
SIZE
"A" "B" "C" "D" "E" "F" "G" "H" WEIGHT
6030-0197 2-1/2" 8-1/2 5-1/2 7 11/16 2-1/2 3-3/8 5/8 4 32 lbs.
6030-0202 3" 9-1/2 6 7-1/2 3/4 3 5-1/8 5/8 4 37 lbs.
6030-0203 4" 11-1/2 7-1/2 9 15/16 4 5-3/4 5/8 8 63 lbs.
EACH FLANGE
"H" = NUMBER OF HOLES
"G" = BOLT SIZE
D
A
F
B
C
E
5 1
2
4
3
ZEPA0520