Brochure

© Copyright 2005 Zoeller Co. All rights reserved.
SECTION: 2.30.010
FM1784
0305
Supersedes
0803
ALL MODELS ARE
COMPLETELY SUBMERSIBLE
HERMETICALLY SEALED
Watertight - dust tight.
MODELS AVAILABLE
• Automatic or Nonautomatic
AUTOMATIC
MODEL
COMPARE THESE FEATURES
• 115V single phase/60 Hz, .4 HP,
5.5 Amps, 3400 RPM.
• Thermal overload protection.
• Non-corrosive engineered plastic motor
housing, pump housing, base, and impeller.
• Oil Free.
• No steel sheet metal parts to rust or corrode.
• All stainless steel screws, switch arm, and
lower motor housing.
• 2-pole fl oat operated mechanical switch.
• Solid polypropylene fl oat.
• UL Listed 15' cord with 3-prong plug.
• Maximum temperature for dewatering -
110°F (43°C).
• Passes 2" inch spherical solids.
• 2" NPT discharge.
• Non-clogging vortex impeller.
• On point— 13" • Off point— 5-3/4"
• Major width - 9-5/16" • Height - 15-7/8"
Model 211
(For Pump Prefi x Identifi cation
see News & Views 0052)
“AQUA-MATE”
SUBMERSIBLE PUMP
FOR
SEWAGE/EFFLUENT OR DEWATERING
PASSES 2" SOLIDS
2" NPT DISCHARGE
Manufacturers of . . .
Product information presented
here refl ects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
visit our web site:
www.zoeller.com
Note: The sizing of effl uent systems normally requires variable level
fl oat(s) controls and properly sized basins to achieve required
pumping cycles or dosing timers with nonautomatic pumps.
(Tested to UL778 and
CSA22.2 108 Standards)