Product Overview

SUMP/SEWAGE BASINS
CONSULT FACTORY FOR LARGER SIZE BASINS OR SPECIAL APPLICATIONS.
Products may not be exactly as pictured.
NOTE: Polyethylene basins should be used for indoor installations only.
SECTION: 2.70.010
FM0487
0516
Supersedes
0514
• Available in high density polyethylene structural foam (PSF), polyethylene or
 berglass
• Ideal for residential, commercial and industrial applications
• Completewithnecessarysealinghardwareandanges
• Available with 2" or 3" vent and 2" or 3" discharge
• Lid with gasket and 4" cast iron inlet hub with anticorrosion coating are included
with the sewage basins
• Centerline of hub is located 10-1/2" from top of basin (std.). Custom locations
available
• Polyethylene sewage pump basins are IAPMO approved. For 10' stack test
models, refer to charts on pages 2 and 3
• Sealed (Radon) basins for sump pumps in 18" x 22" and 18" x 30" sizes
•
Polyethylene sump basin available with plastic unsealed covers in 18" x 22"
• Sewage basins are watertight and gastight when properly installed
• Durable steel cover with gasket standard on simplex and duplex sewage basins
• One piece, seamless construction on all basins
• Duplex covers include two pump plates and inspection plate
• Ready to install for economical and simple installation
• Dimensional Engineering data available
• Temperature rated 130°F
• Fiberglass models available that will pass the 10' water stack test (Refer to
charts on pages 2 and 3) (L. A. - RR-5311)
• Variouscustomdiameters&lengthsavailableinberglass,consultfactory.Also
with 10' water stack test.
COMPARE THESE FEATURES
© Copyright 2016 Zoeller
®
Co. All rights reserved.
18" SUMP BASIN COVERS AND EXTENSIONS
SIMPLEX SEWAGE BASIN
SUMP AND RADON BASINS
SEWAGE BASINS
P/N 31-1608
18" x 30" Premium Basin with Split Cover, AFD, Torque Stops, Black.
18" x 22" Heavy Duty Polyethylene, no inlet hole and hub (P/N 31-0444).
18" x 22" Radon basin with inlet and hub (P/N 31-0251).
18" x 30" Poly, 4" inlet-grommet (loose), no inlet hole. Includes one-piece
blank poly cover w/cord seal (P/N 31-1855).
One Piece, Polyethylene with
1-1/2" Discharge and Cord Grommet.
P/N 17-0294
One Piece, Polyethylene
Molded with 3" x 13" Opening.
P/N 17-0135 P/N 17-0131
One Piece, Steel with 3" Vent,
1-1/2" Discharge, and Cord Grom-
met (Radon Lid).
Basin Extensions, for use with PSF
18" diameter basins:
31-1476 - 6" riser extension w/ hardware.
31-1473 - 12" riser extension w/ hardware.
P/N 31-1476
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
TEL: [phone] • 1 (800) 928-PUMP • FAX: [phone]
Visit our web site:
zoellerpumps.com