Specifications
014508
1. For automatic, use single piggyback variable level float switch or double piggyback variable level float switch.
Refer to FM0477.
2. See FM1228 for correct model of simplex control panel.
3. See FM0712 for correct model of duplex control panel.
30 ft. (9.1m)
TOTAL DYNAMIC HEAD/FLOW
PER MINUTE
EFFLUENT AND DEWATERING
9.130
Shut-off Head:
40
35
12.2
10.7
--
--
MODEL
10
25
20
15
Feet
5
3.0
7.6
6.1
4.6
Meters
1.5
45
29
--
16
38
Gal.
50
44 ft. (13.4m)
8723
--
--
38 ft. (11.6m)
--
--
--
--
34
44
53
61
69
Gal.
--
110
144
170
189
Liters
61
151
129
167
201
231
261
Liters
152
12533
11
22
42
85
153
70
52
42
61
Gal.
77
265
159
197
231
291
Liters
PUMP PERFORMANCE CURVE
MODEL 151/152/153
GALLONS
LITERS
0
TOTAL DYNAMIC HEAD
4
2
6
8
10
0
5
40
10
80
20
120
30
10
15
20
152
151
30
25
35
FEET
14
12
METERS
153
40
45
50
280
FLOW PER MINUTE
160
40
200
50
240
60 70
360320
80 90 100
Model
MODEL COMPARISON
Seal Mode Volts Ph Amps HP Hz Lbs Kg Simplex Duplex
N151 Single Non 11 5 1 6.0 1/3 60 32 15 1 2 or 3
E151 Single Non 230 1 3.2 1/3 60 32 15 1 2 or 3
BN151 Single Auto 115 1 6.0 1/3 60 33 15 * 2 or 3
BE151 Single Auto 230 1 3.2 1/3 60 33 15 * 2 or 3
N152 Single Non 11 5 1 8.5 4/10 60 37 17 1 2 or 3
E152 Single Non 230 1 4.3 4/10 60 37 17 1 2 or 3
BN152 Single Auto 115 1 8.5 4/10 60 39 18 * 2 or 3
BE152 Single Non 230 1 4.3 4/10 60 39 18 * 2 or 3
N153 Single Non 11 5 1 10.5 1/2 60 37 17
BN153 Single Auto 115 1 10.5 1/2 60 39 18 * 2 or 3
E153 Single Non 230 1 5.3 1/2 60 37 17 1 2 or 3
BE153 Single Non 230 1 5.3 1/2 60 39 18 * 2 or 3
*BN and BE models include a 20' (6 m) piggyback variable level pump switch. Additional cord lengths are available in 25' (8 m) and 35' (11 m). 50' (15 m) cords are
available for 230 V units only.
NOTE: Model 151 has a plastic base. Models 152 & 153 have a cast iron base.
© Copyright 2015 Zoeller
®
Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com
All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be
followed including the most recent National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA).
CAUTION
OPTIONAL PUMP STAND P/N 10-2421
• Reduces potential clogging by debris
• Replaces rocks or bricks under the pump
• Made of durable, noncorrosive ABS
• Raises pump 2" (5 cm) off bottom of basin
• Provides the ability to raise intake by adding sections of 1½" or 2"
(DN40 or DN50) PVC piping
• Attaches securely to pump
• Accommodates sump, dewatering and effluent applications
NOTE: Make sure float is free from obstruction.
"Easy assembly"
(pump & discharge pipe
not included.)