Specifications
SECTION: 2.15.080
FM2784
0315
Supersedes
0114
TECHNICAL DATA SHEET
DOSE-MATE SERIES
SK2444
11 11/16"
(297 mm)
3 7/8"
(98 mm)
3 7/8"
(98 mm)
4 5/8"
(117 mm)
6 7/32"
(158 mm)
3 7/8"
(98 mm)
4 15/16"
(125 mm)
1 1/2" NPT
MOTOR
Horse Power 1/3 (151), 4/10 (152), 1/2 (153)
Voltage 115 or 230
Phase 1 Ph
Hertz 60 Hz
RPM 3450
Type Permanent split capacitor
Insulation Class B
Amps 3.2 - 10.5
PUMP
Operation Automatic or nonautomatic
Discharge Size 1-1/2" NPT
Solids Handling 1/2" (13 mm), 3/4" (19 mm) spherical solids
Cord Length 20' (6 m)
Cord Type UL listed power cord
Max. Head 44' (13.4 m)
Max. Flow Rate 77 GPM (291 LPM)
Max. Operating Temp. 130° F (54° C)
Cooling Oil filled
Motor Protection Auto reset thermal overload
MATERIALS
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Plastic or cast iron
Upper Bearing Sleeve bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Engineered thermoplastic
Hardware Stainless steel
Motor Shaft AISI 1215 steel
Gasket Neoprene
NOTE: The sizing of effluent systems normally requires variable level
float(s) controls and properly sized basins to achieve required pumping
cycles or dosing timers with nonautomatic pumps.
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
®
Your Peace of Mind is Our Top Priority
®
R
Tested to UL Standard UL778
and Certied to CSA
Standard CSA22.2 No. 108
SK2064
1 1/2" NPT
3 7/8" (98 mm)
3 7/8" (98 mm)
4 5/8"
6 7/32"
3 7/8" (98 mm)
5 3/8" (137 mm)
12 1/8" (308 mm)
(158 mm)
(117 mm)
NOTE: See model comparison chart for specific details.
© Copyright 2015 Zoeller
®
Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com