Submittal Sheet

ManualsBrandsZoeller ManualsEffluent PumpsModel BN152 Dose Mate High Head Effluent Pump w/ Piggyback Switch (0.4 HP)

150 Series

Features

The "Dose-Mate" series of submersible pumps is designed for use in residential

or light commercial dewatering applications and can be used to transfer

groundwater or effluent. These durable cast iron pumps include a powder

coated epoxy finish to prevent corrosion and are designed to provide great heat

dissipation from the motor, ensuring a long service life. As with every Zoeller

pump, each one is 100% pressure-tested, submerged and run to ensure quality

and reliability for years of trouble-free performance!

Ideal for use in septic systems, low pressure pipe (LPP), and enhanced flow

STEP system applications.

Automatic models include a float-operated, two-pole mechanical switch, a

stainless steel float guard and switch arm, and a solid, buoyant polypropylene

float which prevents water from filling the float and causing a malfunction.

For nonautomatic pumps, variable level control systems and containers of

various sizes are available for longer cycles.

Includes a stainless steel handle for easy installation and removal.

All models are hermetically sealed to be watertight, dust-tight, and completely

submersible.

Reserve Powered Design: For unusual conditions, a reserve safety factor is

engineered into the design of every pump.

Specifications

Motor Characteristics

Motor 1/3 - 1/2 HP

Voltage 115 or 230 V

Phase 1 Ph

Hertz 60 Hz

RPM 3450 RPM

Type Permanent split capacitor

Insulation Class B

Amps 3.2 - 10.5 Amps

Pump Characteristics

Operation Automatic or nonautomatic

Discharge Size 1-1/2" NPT

Solids Handling 1/2" (13 mm), 3/4" (19 mm) spherical solids

Cord Length 20' (6 m) standard

Cord Type UL Listed power cord

Max Head 44' (13.4 m)

Max Flow Rate 77 GPM (291 LPM)

Max Operating Temp 130° F (54° C)

Cooling Oil filled

Motor Protection Auto reset thermal overload

Materials Characteristics

Cap Cast iron

Motor Housing Cast iron

Pump Housing Cast iron

Base Plastic or cast iron

Upper Bearing Sleeve bearing

Lower Bearing Ball bearing

Mechanical Seals Carbon and ceramic

Impeller Type Non-clogging vortex

Impeller Engineered thermoplastic

Hardware Stainless steel

Motor Shaft AISI 1215 steel

Gasket Neoprene

FM1919_Ea

Summary of content (2 pages)

PAGE 1
50 Series Specifications Motor Characteristics Motor 1/3 - 1/2 HP Voltage 115 or 230 V Phase 1 Ph Hertz 60 Hz RPM 3450 RPM Type Permanent split capacitor Insulation Class B Amps 3.2 - 10.5 Amps Pump Characteristics Features The "Dose-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent.
PAGE 2
150 Series Model Model Number Seal Mode Volts Phase Amps HP Hz Lbs Kg N151 Single Non 115 1 6.0 1/3 60 32 15 E151 Single Non 230 1 3.2 1/3 60 32 15 BN151 Single Auto 115 1 6.0 1/3 60 33 15 BE151 Single Auto 230 1 3.2 1/3 60 33 15 N152 Single Non 115 1 8.5 0.4 60 37 17 E152 Single Non 230 1 4.3 0.4 60 37 17 BN152 Single Auto 115 1 8.5 0.4 60 39 18 BE152 Single Non 230 1 4.3 0.4 60 39 18 N153 Single Non 115 1 10.