Spec Sheet
SECTION: 2.20.047
FM1919
0414
Supersedes
0110
Model N152/N153
High Head
Efuent
© Copyright 2014 Zoeller Co. All rights reserved.
COMPARE THESE FEATURES
• Durable cast iron construction
• Model151comesstandardwithaglass-lled
polypropylene base
• Corrosionresistantpowdercoatedepoxynish
• Stainless steel lifting handle
• Assembled with stainless steel bolts
• Non-clogging engineered thermoplastic vortex
impeller design
• Model 151 - 1/3 HP passes ½" spherical solids
• Model 152 - .4 HP passes ¾" spherical solids
• Model 153 - 1/2 HP passes ¾" spherical solids
• Motor-60Hz,3450RPM,oil-lled,hermetically
sealed, automatic reset thermal overload protected
• Carbon/Ceramic seals
• Upper sleeve bearing and lower ball bearing running
in bath of oil
• 20 ft. UL Listed power cord with molded 3-wire plug
• 1½" NPT vertical discharge
• BN and BE standard models include a 20 ft. variable
leveloatswitch
• Operatesattemperaturesto130°F(54°C)inefuent
applications
• Allmodelsincludea1½"x2"PVCadaptertting
Note: Thesizingofefuentsystemsnormallyrequires
variableleveloat(s)controlsandproperlysized
basinstoachieverequiredpumpingcyclesordosing
timers with nonautomatic pumps.
151/152/153 EFFLUENT SERIES
(For Pump Prex Identication see News & Views 0052)
“DOSE-MATE”
FOR SEPTIC TANK - LOW PRESSURE PIPE (LPP)
AND ENHANCED FLOW STEP SYSTEMS
EFFLUENT
SUBMERSIBLE
1½" NPT DISCHARGE
MODELS AVAILABLE
• N151/N152/N153 & E151/E152/E153 nonautomatic
• BN151/BN152/BN153 & BE151/BE152/BE153
packaged with Piggyback Variable Level Float Switch
• 1/3, .4 & 1/2 HP, 1Ph 115V or 230V
Tested to UL Standard UL778
andCertiedtoCSA
Standard CSA22.2 No. 108
Model BN152/BN153
High Head
Efuent
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
visit our web site:
www.zoeller.com
®
Your Peace of Mind is Our Top Priority
®
ALL MODELS ARE
COMPLETELY SUBMERSIBLE
HERMETICALLY SEALED
Watertight - dust tight. Permanently oiled bearings.
VARIABLE LEVEL CONTROL
SYSTEMS AVAILABLE
Note: Thesizingofefuentsystemsnormallyrequiresvariablelevel
oat(s)controlsandproperlysizedbasinstoachieverequired
pumping cycles or dosing timers with nonautomatic pumps.