Submittal Sheet

ManualsBrandsZoeller ManualsEffluent PumpsModel BN140 Flow-Mate Single Seal Sump Pump w/ Piggyback Switch (w/ 20' Cord)

140 Series

Features

The "Flow-Mate" series of submersible pumps is designed for use in residential

or light commercial dewatering applications and can be used to transfer

groundwater or effluent. These durable cast iron pumps include a powder

coated epoxy finish to prevent corrosion and are designed to provide great heat

dissipation from the motor, ensuring a long service life. As with every Zoeller

pump, each one is 100% pressure-tested, submerged and run to ensure quality

and reliability for years of trouble-free performance! This attention to detail is an

inherent feature of every pump in this series, making it one of the most reliable

in the industry.

Ideal for use in septic systems, low pressure pipe (LPP), and enhanced flow

STEP system applications.

Variable level control systems and containers of various sizes are available for

longer cycles.

Double seal models are available to improve bearing lubrication and prevent

leaks and damage to seals or bearings during dry run conditions.

All models are hermetically sealed to be watertight, dust-tight, and completely

submersible.

Reserve Powered Design: For unusual conditions, a reserve safety factor is

engineered into the design of every pump.

Specifications

Motor Characteristics

Motor 3/4 - 1 HP

Voltage 115 or 230 V

Phase 1 Ph

Hertz 60 Hz

RPM 3450 RPM

Type Permanent split capacitor

Insulation Class B

Amps 6.0 - 13.0 Amps

Pump Characteristics

Operation Automatic or nonautomatic

Discharge Size 1-1/2" NPT

Solids Handling 1/2" (13 mm), 3/4" (19 mm) spherical solids

Cord Length 20' (6 m) standard

Cord Type UL listed, neoprene cord with molded plug cap

and ground wire

Max Head 50' (15.2 m) or 74' (22.6 m)

Max Flow Rate 86 GPM (326 LPM) or 61 GPM (232 LPM)

Max Operating Temp 130° F (54° C)

Cooling Oil filled

Motor Protection Auto reset thermal overload

Materials Characteristics

Cap Cast iron

Motor Housing Cast iron

Pump Housing Cast iron

Base Cast iron

Upper Bearing Sleeve bearing

Lower Bearing Ball bearing

Mechanical Seals Carbon and ceramic

Impeller Type Single vane or non-clogging vortex

Impeller Engineered thermoplastic

Hardware Stainless steel

Motor Shaft JIS S45C steel

Gasket Neoprene

FM1502_Ea

Summary of content (2 pages)

PAGE 1
40 Series Specifications Motor Characteristics Motor 3/4 - 1 HP Voltage 115 or 230 V Phase 1 Ph Hertz 60 Hz RPM 3450 RPM Type Permanent split capacitor Insulation Class B Amps 6.0 - 13.0 Amps Pump Characteristics Features The "Flow-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent.
PAGE 2
140 Series Model Model Number Seal Mode Volts Phase Amps HP Hz Lbs Kg N140 Single Non 115 1 12.0 1 60 43 20 E140 Single Non 230 1 6.0 1 60 44 20 BN140 Single Auto 115 1 12.0 1 60 44 20 BE140 Single Auto 230 1 6.0 1 60 46 21 E145 Single Non 230 1 6.0 3/4 60 46 21 N145 Single Non 115 1 13.0 3/4 60 54 24 BN145 Single Auto 115 1 13.0 3/4 60 55 25 N4140 Double Non 115 1 12.0 1 60 50 23 E4140 Double Non 230 1 6.