Part List

STEP 1 Determine Installation Conguration

NOTE: The basin is designed to be installed directly under the sink (Internal Trap) or on the side (standard).

IMPORTANT! Check local and state codes before using the internal trap option.

 1.1)Figure1.1Aand1.1Baretypicalcongurationsforinstallationofthedrainsystems.Theactualcongurationwillvary 

dependingonyourcabinetandsinkconguration.

NOTE: If installing the internal trap, record the “x” dimension, it will be required in Step 4.

INTERNAL TRAP COMPONENTS SUPPLIED BY OTHERS.

Figure 1.1B

STANDARD (EXTERNAL TRAP)

SK2001

Figure 1.1A

INTERNAL TRAP

X (4" MIN.)

SEE NOTE

PIPING SHOWN ONLY

FOR CLARITY.

PIPING SHOWN ONLY

FOR CLARITY.