Installation Sheet
SECTION: 2.65.050
FM2801
0814
Supersedes
0114
TECHNICAL DATA SHEET
Drain Pump Series
Models 104*, 105, 110, 115, 120, 131, 132*
SK2012
U
P
C
®
C
Complies with
ASME A112.3.4
and CSA B45.9.
* Models 104 & 132 are not IAPMO approved.
14 1/2”
(368 mm) DIA.
12 1/2”
(318 mm)
11 7/8” (302 mm)
9” (229 mm)
CORD SEAL
HOLE
1 1/2” DRAIN
INLET (TOP)
1 1/2” NPT
DISCHARGE
2” NPT
VENT
(8) COVER
HOLES
11 3/4”
(298 mm) DIA.
1 1/2”
DRAIN
INLET (SIDE)
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
®
Your Peace of Mind is Our Top Priority
®
*
© Copyright 2014 Zoeller
®
Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com
BASIN FEATURES
• Polypropylene construction
• 2" NPT vent
• 1-1/2" compression slip fit for top and side intake.
NOTE: 132 comes preassembled for side inlet only.
• Basin passes the 10' (3 m) stack test (models 104 and 132 will not)
• PVC "Full Flow" check valve with 1-1/2" or 1-1/4" slip X slip union
(excludes model 104).
• Threaded connections
MODELS 104*, 132*
• 3/8" (9 mm) solids-passing capacity
• Temperature rated for 110°F (43°C)
• 1-1/2" NPT discharge
• 3400 RPM
• Oil free
• Includes 1-1/2" PVC slip union check valve
• Model 132 is preassembled
• Passes laundry lint
• 9' (2.7 mm), UL Listed, 3-wire cord and plug
• Stainless steel screws, switch arm and lower motor housing
• Non-clogging vortex impeller
MODELS 105, 110, 115, 120, 131
• 1/2' (12 mm) solids-passing capacity
• Temperature rated for 130°F (54°C)
• 1-1/2" NPT discharge
• 1550 RPM on 50 series pumps, 1725 RPM on 90 series
• M53 and M55 with glass-filled polypropylene base
• M59 all bronze construction
• M57 and M98 all cast iron construction
• Includes 1-1/4" or 1-1/2" PVC slip x slip union check valve
• Passes laundry lint
• Automatic, float operated mechanical switch
• 9' (2.7 mm), UL Listed, 3-wire cord and plug (15' [5 m] cord
standard on model 98)
• Stainless steel screws, guard, handle and switch arm
• Non-clogging vortex impeller