Product Overview

© Copyright 2007 Zoeller Co. All rights reserved.
Model 10-0125
An Electrical Control Panel is used on a Simplex pump application where automatic electrical cycling of the pump is desired for added protection in
residential or commercial applications. A Control Panel is required for all systems using a nonautomatic pump. The built-in alarm system, a standard
feature, will activate when the water level becomes unusually high. All electrical systems must be installed by a qualifi ed electrician and according
to the National Electrical Code. (See Section 430-71 though 430-113, plus any others that apply.)
SECTION: 4.10.005
FM1596
0307
Supersedes
0406
ELECTRICAL CONTROL PANELS - FOR SIMPLEX INSTALLATIONS
Simplex
Control Panel
SINGLE PHASE CONTROL PANEL FEATURES
•
115-208-230 Volts.
• Clear dead front panel.
• Complete with (3) 20 ft. control fl oat switches.
• Equipment disconnect.
• Motor contactor (all models except 10-1019 and 10-1023)
• NEMA 4X watertight enclosure with lockable latch.
• Top mounted alarm light.
• Alarm horn provides audio warning of alarm con di tion
(83 to 85 decibel rating).
• Pump run indicator light.
• Horn silence and alarm test toggle switches.
• HOA switch.
• Complete installation instructions included.
• UL Listed for US & Canada.
• Lockable Latch.
• 2 Year Warranty.
• Dry auxiliary contact (not available in Plug-In Panels).
SINGLE PHASE SIMPLEX PLUG-IN CONTROL PANEL
•
115V model 10-1019 or 230V model 10-1023.
• NEMA 4X enclosure with hinged cover.
• Receptacle for use with piggyback pump switch.
• Alarm Horn (83 to 85 decibel rating).
• Terminal strip.
• Horn silence switch to turn alarm on or off.
• Alarm Float only.
Product information presented
here re fl ects con di tions at time
of publication. Consult fac-
tory re gard ing dis crep an cies or
in con sis ten cies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
[phone] • 1 (800) 928-PUMP • FAX [phone]
visit our web site:
www.zoeller.com
SINGLE PHASE SIMPLEX PUMP CONTROL/ALARM SYSTEM
Model # Volts Amp Range Float Switches Included Features
(1) Alarm Float Switch not included, purchase separately. See FM0526.
* 10-0125 Branch Circuit Protection provided by the installing electrician.
10-1019 115V 0-15 Alarm Float Only Plug-In
10-1023 230V 0-15 Alarm Float Only Plug-In
10-1036 115V, 208-230V 0-7 Three-20’ Control Floats Circuit Breaker Disconnect
10-1037 115V, 208-230V 7-15 Three-20’ Control Floats Circuit Breaker Disconnect
10-1038 115V, 208-230V 15-20 Three-20’ Control Floats Circuit Breaker Disconnect
10-0125* 115V, 208-230V 0-20 Three-20’ Control Floats Pull Out Disconnect
Simplex
Plug-In
Panel
Model 10-1019
R
L
U
NOTE: 600 and X600 Se ries
single phase pumps re quire
special panels that include
start com po nents. See Se-
lec tion Guide FM1228 and
FM1705 for cor rect panel
selection.
NOTE: All variable level fl oat
switches in this section are
mechanically activated and
do not contain mercury.