Instruction manual

16 17
Asacidisaddedautomaticallyovertime,totalalkalinitylevelswilldecrease
andmayresultininconsistentpHlevels.
Itmaybenecessarytoadda“buffer”elementtothewaterinyourpool.
Asitisnotrecommendedtoaddacidafteraddinga“buffer”,temporarily
disabletheacidpump(refertoEnablinganddisablingtheacidpump).

Intheinterestsofsafety,theZodiacTRi-pHisshippedwiththeacidpump
disabled.
WhenaTRi-pHisconnected,theacidpumpisprogrammedtobegin
operationafterapproximately8hoursofbeingactivated.Thiscanbeover
riddenbydisablingtheacidpump.
Whentheacidpumpisdisabled,thesetpointreadingwillbereplacedwith
“---“untiltheacidpumpisre-enabled.
After8hours,thedeactivatedpumpwillautomaticallyre-enableitself.

1. Fromthedefaultoperatingscreen.
2. Pressthe
button.
3. Press
/ buttonstomovearrowto‘pHSETUP’.
4. Press
toenterthepHmenu.
5. Usethe
/ buttonstohighlight‘ACIDPAUSED’
(OR‘ACIDENABLED’).
6. Press
totogglebetween‘ACIDENABLED’and‘ACIDPAUSED’.
7. Oncetheappropriateselectionhasbeenmade,press
twiceorwait
 ~60secondsfortheTRitorevertbacktothedefaultoperatingscreen.

