Instruction manual

12 13

ThedefaultpHsettingofyourZodiacTRiis7.2.Thiscanbechanged
accordingtoyourpool’srequirements.
TochangethepHsetpoint:
1. CalibratethepHsensor.
2. Fromthedefaultoperatingscreen,press
.
3. Usethe
/ buttonstohighlight‘pHSETUP’,thenpress .
4. Usethe
/ buttonstohighlight‘pHSETPOINT’,thenpress .
5. Usethe
/ buttonsuntilthedesired“setpoint”isachieved
Thenpressthe tosavethedesiredsetpointthenpress twice
togobacktooperatingscreenorwaitforoneminute.