Instruction manual

10 11

Idealchlorinelevelrange:1-3partspermillion(PPM).
PriortostartingtheTRi-pHthechlorinelevelcanberaisedusingeither
liquidorgranulatedchlorine.

IdealSaltlevelrange:3000–5000partspermillion(PPM).
Efcientandcorrectoperationoftheelectrolyticcellrequiresasufcient
amountofsaltinthewater.
Notenoughsaltmaycauseareducedchlorineoutputlevelandareduced
lifeofthecell.
Toomuchsaltwillcauseeyeirritationandasaltytasteinthepoolwater.

Inadditiontothepoolchemistrybeingimportant,theconditionofthe
ltrationsystemandskimmerbasketsmustbeassessed.Ifrequired,
backwashthelterandremovedebrisfromthepoolskimmerbasket(s).

WhentheZodiacTRiUnitautomaticallydetectsthepresenceofaTRipH
moduleitdisplaysthepool’spHsetpoint.
1. Themessage‘pHCONTROL’appearsonthethirdlineofthescreen.
2. Thepool’spH“setpoint”isdisplayedatthebottomofthescreen.
 NOTE:Fromfactory,theaciddeliveryisdisabledandthepHsetpointwillbedisplayedas“----“.
Referto‘EnablinganddisablingtheAcidPump’formoreinformation.Whentheaciddeliveryis
enabled,thepHsetpointisdisplayedatthebottomofthescreen.
