User manual

3/INSTALLATION
AND USER GUIDE
The following steps will help you get up and running with your new Ei salt water chlorinator.
WARNING!
The installation and use of Ei salt water chlorinators must comply with the instructions
and recommendations presented in this manual. For additional information, please
contact your professional pool retailer.
3.1 INSTALLING THE Ei POWER PACK
1. Find a suitable location for the power pack mount. It should be installed no further than
1.8 metres from the cell (this is the maximum cell cable length), ideally in the technical shed
with the filtering system or next to the filtering unit.
IMPORTANT: If the power pack is mounted on a post, a waterproof panel (at least 300 mm
by 400 mm high) must be fitted behind the power pack.
2. Using the screws provided fasten the mount solidly to the wall and place the power pack
on it.
NOTE: Only connect the appliance to a power outlet once the installation has been completed
(See the Connection to Ei power pack paragraph).
28