User manual

9/SAFETY
> The installation and use of the Ei salt chlorinator requires full compliance with the recommen-
dations of the present document For additional information, please contact your professional
pool retailer.
> During any intervention on the pool's hydraulic circuit and/or filtering system, remember to
switch off the Ei chlorinator first ( button), then switch off the filtering unit and the mains
power supply.
> During a filter backwash your Ei chlorinator MUST be turned off ( button).
> Do not scrape the electrodes with a brush or a metal object, do not bend them.
> The maximum acceptable water temperature for water in the Ei cell should not be in excess
of 40 °C for optimal production.
> Water pressure in the Ei cell must not exceed 2.75 bar (275 kPa or 40 PSI).
> Check the Ei cell regularly to ensure there is no debris that the filter may not have stopped
and/or that there is no scale deposit on the electrodes.
> The Ei power pack should not be installed above a heat source (pump, heating, radiator,
closed block…). It must also be mounted on a vertical wall in a dry and well ventilated place.
> The life span of the Ei electronic equipment will be extended significantly if it is protected
from direct sunlight, from humidity and from all types of chemical products.
44