User manual

4.2 LANGUAGE SELECTION
The default language for your Ei is French. However the appliance is capable of displaying
most messages in the following languages: French, English, Spanish, Italian, German, Dutch
and Afrikaner.
To select your language:
1. Switch on the Ei.
2. Wait for the completion of the initial boot sequence on the LCD screen (About 5 seconds).
3. Press and maintain pressed down the key. After about 5 seconds the current language
will be displayed on the screen.
4. Maintain the key pressed down until the desired language is displayed on the LCD screen.
5. Release the key when the desired language is displayed. It will now be the language used
to display messages on the LCD.
4.3 SETTING THE CLOCK (CLOCK)
IMPORTANT REMARK: Your Ei Zodiac chlorinator is equipped with an internal
memory. During the first Ei electrical connection (Or upon re-initializing) it is important
to leave the power on for at least 24 hours uninterrupted (filtration via forced activation
or direct connection). This will ensure that the internal accumulator will be sufficiently
charged to store in memory all the operating parameters.
1. Turn power on.
2. Wait until the successful completion of the initialization sequence on the LCD screen (About
5 seconds).
3. Press down and maintain down the key.
4. While maintaining the key pressed, press the key, in order to set the hours,
until you reach the desired hours value. (The key can be maintained pressed to accelerate
the incrementation).
5. While maintaining the key pressed, press down the key, in order to set the
minutes, until you reach the adjustment wanted. (The key can be maintained pressed to
accelerate the incrementation).
6. Release the key - the correct time has now been set on the clock.
NOTE: The clock uses a 24 hours display format.
33