Product specifications

Page 15

3. Remove the white cap covering the comm hole (see Figure 19).

4. Thread the controller cable through the hole. A grommet may be necessary depending on the size of the cable

being used.

5. Attach a cable tie to the controller cable as shown (see Figure 19).

Cable Tie

Comm Hole

Figure 19. Accessing and Wiring to the Power PCB

6. In the AquaLink

RS or PDA power center, wire the power pack directly to the LOAD SIDE of the ﬁ lter pump

relay

(see Figure 20).

Figure 20. Wiring Power Pack to an AquaLink RS or PDA Power Center (240 VAC and 120 VAC)

AquaLink RS or PDA Power Center

Filter Pump Relay

Aux. 3 Relay

Load

Line 1

120 VAC

To Filter Pump

(120 VAC)

To Power Pack

(120 VAC)

Neutral

To Breaker

Panel

Filter Pump Relay

Aux. 3 Relay

Load2

Line 2

Load1