Owner`s manual

CHILD SAFETY
Children should not be allowed to operate or perform maintenance
.................. on this product. No one, particularly children, should sit, step, lean, or
climb on any of your pool’s operational system. In the interest of child safety, all
components of a pool’s operational system should be located at least 3 metres
away from the pool.
WARNINGS
Clearwater Ei Salt Chlorinators are designed for domestic swimming pool
use only. Contrary use could affect performance and void the warranty.
Operating a salt chlorinator without water owing through the cell may
cause a build up of ammable gases, resulting in re or explosion.
SERVICE TO ZODIAC EQUIPMENT SHOULD ONLY BE
CARRIED OUT BY A QUALIFIED POOL PROFESSIONAL.
THE USE OF EYE PROTECTION IS RECOMMENDED
WHEN WORKING WITH POOL CHEMICALS.
Keep equipment out of reach of children.
A damaged supply cord should only be replaced by the manufacturer, service
agent or electrician.
When installing and using this electrical equipment, always follow basic safety
precautions.
Before performing installation, disconnect all power.
Free available chlorine in your pool should be maintained between 1 and 3 ppm
(parts per million) at all times.
GENERAL
WARNINGS
2
19
BACKUP BATTERY
The Clearwater Ei unit is tted with a long life rechargeable battery. This battery
should last in excess of 500 hours without the mains being connected. The battery
will retain ALL settings in the event of a power failure.
In addition the Microprocessor in the unit will retain some settings permanently, in
the event of the battery going at or being replaced:
Operating hours
Cell hours
Controller setting
ERRORS / WARNINGS
NO FLOW
Diagnosis: Insufcient water ow in the cell.
This could mean the circulation pump has ceased to function, or the lter needs
cleaning. The chlorine output will be turned off at this time.
CHECK SALT
Diagnosis: The salt concentration in the pool is insufcient and/or the water
temerature is too low. (The orange salt indicator light is on). Always maintain a salt
level of 4000 ppm. If you don’t know what your salt level is or how to test it, consult
your local pool care professional.
OUTPUT FAULT
Diagnosis: There could be a problem with the power supply. Turn power off at the
power point and consult your local pool care professional.