Owner`s manual

The Clearwater Ei unit has been designed to be the world’s simplest salt chlorinator.
Simple to install, operate and maintain, the Clearwater Ei unit will provide you many
years of trouble free operation and keep your pool safe and sparkling for the whole
family to enjoy.
1 x Ei Power pack
1 x Ei Chlorine generating cell
1 x Power pack bracket
1 x Pipe spacer
1 x Tightening tool
1 x Screw set (includes wall plugs)
1 x Hole saw
1 x Owners manual/warranty card
C -
D -
E -
A.
B.
C.
D.
Carton contents:
E.
F.
G.
H.
Additional contents
CONTENTS OF
THE CARTON
4
F -
G-
17
SETTING THE
OUTPUT LEVEL
Turn the chlorinator ‘ON’ by pressing the button.
Press the Output button to reach the desired output level. One amber level is
the minimum setting (20%) and the output can be adjusted in increments of 20%
up to 100%.
If the ‘Output’ button is pressed beyond 100%, the output level setting will drop to 20%.
1)
2)
3)
NOTE: If your output is set at 20% (one light) the Clearwater Ei unit
will run for 2mins every 10mins, 40% (2 lights) it will run for 4mins
every 10mins and so on.
When setting the chlorine output level you must consider the size of the pool,
the amount of use the pool will be receiving and how hot the weather is. All these
factors weigh greatly on the level of output needed. Simply adjust the output level
needed using the following steps.
On/Off
Safety Alert: if using a pool cover of any kind always reduce your
chlorine output to a minimum. High levels of chlorine in your pool will
corrode or damage some equipment such as ladders, pool cleaners etc.