Specifications

ZX420 Series User Guide Page 6
3. Pull up on the extraction levers to finish seating the adapter.
System-specific Requirements
The host computer system should automatically assign all system resources, such as I/O
addresses and interrupt lines (IRQ).
LAN Cable Connection
The LAN cable must be properly attached to a functioning network for the adapter to operate.
100 Mbps connections require Category 5 cabling.
Connecting to the Network
You can use one of two types of cable attachments. Each requires a different type of cable
(see table below).
Cable Type Other End of Connection Notes
Straight Hub or switch with the MDI-
X connection.
Do not plug into a port marked
“uplink”or MDI. Some hubs and
switches provide a few ports with
selections to make them type MDI for
uplinks and daisy-chaining.
Crossover (or
Null)
Directly to another PC
network adapter.
Direct PC to PC connections without
an intervening hub or switch.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com