Specifications

ZX420 Series User Guide Page 5

HARDWARE INSTALLATION

You can easily install your ZX420 Series Adapter into an open slot in your CompactPCI

system. Refer to your system documentation if necessary.

Installing the ZX420 Series Fast Ethernet Adapter

This procedure includes all steps required for installing the adapter into a CompactPCI slot.

Preparing for the Install

• Power off your system.

• Discharge any static electricity from your body by touching the metal chassis, or by

using an anti-static wrist strap. If you do not have a ground strap, maintain physical

contact with the case to maintain the same electrical potential with the system.

Installing the Adapter

1. Remove the slot cover from the front panel bracket (slot filler) on your system.

2. Insert the ZX420 Series adapter card into the slot.

Be sure you push the adapter straight into the slot. The bracket and the slot must be

properly aligned and the adapter fully “seated.” A bracket is seated properly when it

touches the system case up to the extraction levers.

ZX424 CPCI Adapter

Observe proper Electro-Static Discharge

procedures at all times. Failure to do so may

in damage to the cPCI Adapter or system.

Do not use excessive

force.

0 I

Ω

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com