Technical data

Field Replaceable Unit Removal and Replacement

HP bc2100 ATCA Server Blade Hard Disk Drive

Chapter 1

Figure 1-19 HP bc2100 ATCA Server Blade, Access Cover Panel Installed

Step 3. Remove the four countersunk retaining screws that secure the blade cover panel, and remove the

access cover panel. Set the cover panel and the retaining screws aside for reuse.

Step 4. Locate the HDD (Figure 1-20), and remove the four pan head screws holding the HDD mounting

brackets to the blade circuit board stand-off posts. Set the mounting bracket pan head screws aside

for reuse during replacement.