Technical data

Field Replaceable Unit Removal and Replacement

Alarm Display Panel and Alarm Connector Panel

Chapter 1

Figure 1-10Alarm Display Panel, Front View

Step 2. Pull the Alarm Display Panel unit from the chassis and place it in an anti-static bag.

Replacing the Alarm Display Panel

WARNING Electrical Shock Hazard to Personnel. Shut down all normal operation of the 14-Slot Shelf and

disable/disconnect all external power supply power domain circuit breakers in the OFF (O)

position before completing any of the following steps. Failure to disable/disconnect all power

supplied to the 14-Slot Shelf at the power source may result in personal injury.

CAUTION Electrostatic Discharge Hazard. Observe all ESD safety precautions while completing this

procedure. Failure to follow ESD safety precautions could result in damage to the 14-Slot Shelf

and equipment.

To replace an Alarm Display Panel, complete the following steps: