Technical data

Field Replaceable Unit Removal and Replacement

HP bc2100 ATCA Server Blade

Chapter 1

Figure 1-6HP bc2100 ATCA Server Blade, Front Panel Indicators

Step 3. With the blue hot-swap LED illuminated continuously, pull both extraction handles to the full-out

(extract) position. This will disengage the HP bc2100 ATCA Server Blade backplane connectors

from the 14-Slot Shelf chassis.

Step 4. Carefully pull the HP bc2100 ATCA Server Blade out of its mounting slot.

CAUTION Possible equipment damage due to excessive heat. If the HP bc2100 ATCA Server

Blade will not be immediately replaced, install a blade cage front filler panel in its

place in order to maintain cooling air plenum integrity of the Shelf.

Step 5. Remove the SAS Disk Drive and all installed memory modules from the blade (removal and

reinstallation procedures for the SAS Disk Drive and memory modules later in this chapter).