Technical data

Field Replaceable Unit Removal and Replacement
Introduction
Chapter 1
22
Introduction
This section provides detailed procedures for removing and replacing all HP bh5700 ATCA 14-Slot Blade
Shelf Field Replaceable Units (FRUs), including important safety information.
Field Replaceable Units (FRUs) for the HP bh5700 Telco Blade 14-Slot Shelf include those shown in
Table 1-1. Some 14-Slot Shelf FRUs can be “hot-swapped” (removed and replaced during normal shelf
operation), while others require that all system power be disconnected before they can be removed and
replaced.
Table 1-1 HP bh5700 ATCA 14-Slot Blade Server Field Replaceable Units
FRU Description Manufacturing P/N Replacement P/N
Exchange P/N (if
repairable)
14-Slot Shelf with
Backplane
AD171-2000A AD171-67001 AD171-69001
Fan Tray AD 171-67002
Air Filter Carrier, 14-slot AD 171-67003
Air Filter Element, Qty 10 AD171-67006
Alarm Connector Panel AD172-67006
Cable Tray Kit AD171-2100A
Front Filler Panel AD171-0001A
Rear Filler Panel AD171-0002A
Power Entry Module
(PEM)
AD172-67003
SEEPROM Assembly,
Backplane
AD172-67004
Alarm Display Panel AD172-67005
Flange Kit AD171-67005
PEM Fuse Kit, Quantity 5 AD171-67004
Shelf Manager (ShMM) AD190-6001 AD190-67001 AD190-69001
HP bc2100 ATCA Server
Blade
AD239-60001 AD239-67001 AD239-69001
Ethernet Switch Blade AD173-60001 AD173-67001 AD173-69001
Hard Disk Drive (HDD)
HP 72 GB SAS
AD241-2000A
1 GB DIMMs (Pair) AD191-60001 AD191-69001
2 GB DIMMs (Pair) AD192-60001 AD192-69001