Technical data

Chapter 4
System Event Log Decoding
Sensor Type Codes (Table 36-3 from the IPMI v1.5 Documentation)
215
Watchdog 2 23h
00h
01h
02h
03h
04h-07h
08h
This sensor is recommended for new IPMI v1.0 and later
implementations.
Timer expired, status only (no action, no interrupt)
Hard Reset
Power Down
Power Cycle
reserved
Timer interrupt
The Event Data 2 field for this command can be used to
provide an event extension code, with the following
definition:
7:4 interrupt type
0h = none
1h = SMI
2h = NMI
3h = Messaging Interrupt
Fh = unspecified
all other = reserved
3:0 timer use at expiration:
0h = reserved
1h = BIOS FRB2
2h = BIOS/POST
3h = OS Load
4h = SMS/OS
5h = OEM
Fh = unspecified
all other = reserved
Platform Alert 24h
00h
01h
02h
03h
This sensor can be used for returning the state and
generating events associated with alerts that have been
generated by the platform management subsystem
platform generated page
platform generated LAN alert
Platform Event Trap generated, formatted per IPMI PET
specification
platform generated SNMP trap, OEM format
Table 4-5 Sensor Type Codes (Table 36-3 from the IPMI v1.5 Document)
Sensor Type
Sensor
Type
Code
Sensor
Specific
Offset
(Data 1)
Event