Technical data

Chapter 4
System Event Log Decoding
Sensor Type Codes (Table 36-3 from the IPMI v1.5 Documentation)
207
POST Memory
Resize
0Eh - -
System
Firmware
Progress
(Formerly
POST Error)
0Fh 00h
01h
System Firmware Error (POST Error)
The Event Data 2 field can be used to provide an event
extension code, with the following definition:
Event Data 2:
00h Unspecified.
01h No system memory is physically installed in the
system.
02h No usable system memory, all installed memory has
experienced an unrecoverable failure.
03h Unrecoverable hard-disk/ATAPI/IDE device failure.
04h Unrecoverable system-board failure.
05h Unrecoverable diskette subsystem failure.
06h Unrecoverable hard-disk controller failure.
07h Unrecoverable PS/2 or USB keyboard failure.
08h Removable boot media not found
09h Unrecoverable video controller failure
0Ah No video device detected
0Bh Firmware (BIOS) ROM corruption detected
0Ch CPU voltage mismatch (servers that share same
supply have mismatched voltage requirements)
0Dh CPU speed matching failure
0Eh to FFh reserved
System Firmware Hang (uses the same Event Data 2
definition as following the System Firmware Progress
offset)
Table 4-5 Sensor Type Codes (Table 36-3 from the IPMI v1.5 Document)
Sensor Type
Sensor
Type
Code
Sensor
Specific
Offset
(Data 1)
Event