Technical data

Chapter 3
Diagnostics
BIOS Settings
188
BIOS Settings
Tests affected by BIOS settings and optionally present hardware are given below.
Table 3-23 BIOS Settings and Description
Test Module Description
lxBMC Not affected
lxCPU Affected by CPU speed settings in the BIOS.
Affected by enabling or disabling HyperThreading in the BIOS
lxICHx Disabled if no Serial Ata Ports autosensed.
Affected by the presence or absence of PMCs.
(1 on HP bc2100 ATCA Server Blade; common example: Video
Card)
lxPCIe Not affected
lxPCIx Affected by the presence or absence of PMCs
lxpci Affected by the presence or absence of PMCs
lxUsb Affected by disabling USB 2.0 support in the BIOS.
Affected by the presence of USB devices connected to the blade’s
USB port(s); common examples are keyboard, mouse, HUB, Flash
JumpDisk, external CD, etc.
lxcmos Affected by changing CMOS settings after the module has been
configured
Disk Partition checks affected by adding or removing disk partitions
after the module is configured.
Physical disk checks affected by adding, removing, or replacing
hard disk drives.
SMB_Info Affected by changes to the associated FRU or SDR data.
Tests that look at the Product FRU, which should not change.
Tests that look at the Board FRU, some of which may change; an
example is the Board. FRU’s Description field.
Tests that look at the Chassis FRU, which change if the blade is
installed in a different chassis after the module is configured
Memory
Controller Hub
Affected by the type and configuration of memory DIMMs