Technical data

Chapter 3
Diagnostics
HP bc2100 ATCA Server Blade Diagnostics Syntax and Semantics of UI
183
This switch forces advisory status and error messages to be displayed in the test message.
/W
Command Line: /W
This switch forces interactive tests off. Default values provided by the module are used in place of the users
input.
Message Redirection
The following switches can be used to redirect test message types to files. Any combination of the parameters
is allowed.
Command Line:.
• /RE filename - Redirect errors to filename.
• /RA filename - Redirect advisory to filename.
• /F.RS filename - Redirect status to filename.
• /RP filename - Redirect pause to filename.
• /RT filename - Redirect statistics to filename.
• /RR filename - Redirect all to filename.
Autoconfigure
Autoconfigure is the act of programmatically capturing a function’s (hardware or software) feature set for
testing purposes. Autoconfigure runs each module in a mode that sets the module’s parameters to pass on the
current hardware. Autoconfigure should only be used on known good hardware. See Figure 3-17 for
information on starting the autoconfigure process.
Figure 3-17 Starting Autoconfigure