Technical data

Chapter 3
Diagnostics
HP bc2100 ATCA Server Blade Diagnostics Syntax and Semantics of UI
147
HP bc2100 ATCA Server Blade Diagnostics Syntax and Semantics of
UI
BDP CLI
The BDP Command Line Interface (CLI) can be accessed by logging into the Service OS using telnet or ssh. To
run the diagnostics, use “bdp” as the user name (default password “bdp”).
CLI Usage
This section describes the various command line options available in the BDP CLI utility.
The BDP executable can be run or invoked remotely from the system manager or locally on the Service OS,
with several options. The options enable user to:
• Perform diagnostics on a selected module.
• Output the test results to the screen or to a file at a specified location.
• Halt on error.
• Execute for a given period of time.
• Execute a specific number of times.
The syntax of the BDP executable is as follows:
bdp [-c <configuration>]
[--he ]
[-n <repeat number>]
[--rr <File name >]
[--rv <File name>]
[--re <File name >]
[-v]
[--help]
The options are described in Table 3-5.
Table 3-5 BDP Command Options
Option Description
-e <configuration> Default <configuration> = core
Numeric values can also be used: core =0
The numeric values for these configurations are mapped and listed
in the platform.ini file. Refer to Customizing BDP for additional
information on creating configurations.
-he Halt on error