Technical data

Chapter 3
Diagnostics
General ATCA Diagnostics for the Shelf Management Module (ShMM)
128
Assertion Mask: 0x0001
System Firmware Error
Deassertion Mask: 0x0001
Settable / Readable Mask: 0x0001
System Firmware Error
sensordata [<addr> [[lun: ]<sensor id>]
The sensordata command displays the current value for a sensor.
CLI> sensordata 82 0:12
82: LUN: 0, Sensor # 12 ("Bottom Temp")
Type: Threshold (0x01), "Temperature" (0x01)
Status: 0xc0
All event messages enabled from this sensor
Sensor scanning enabled
Initial update completed
Raw data: 28 (0x1c)
Processed data: 28.000000 degrees C
Status: 0x00
shelf <sub-command>
The shelf command displays information on the following list of valid sub-commands:
• address_table
• cooling_state
• fans_state
• power_distribution
• power_management
• pci_connectivity
• ha_connectivity
• h110_connectivity
• point-to-point_connectivity
• MaxCurrent [feed] <Amps>
• MinVoltage [feed] <Volts>
• Activation <addr> <fru_id> 1/0
• Deactivation <addr> <fru_id> 1/0