Technical data

Chapter 3
Diagnostics
General ATCA Diagnostics for the Shelf Management Module (ShMM)
122
board [physical slot #]
board is used to print status and information about a board in the chassis. The command displays the Device
ID String, the How Swap State, and the reason the previous Hot Swap State change was made. This
information is useful when FRUs have transitioned from active to inactive due to a fault.
Running the command without any arguments will display the status for all boards in the chassis.
CLI> board 7
IPM Sentry Shelf Manager Command Line Interpreter
Physical Slot # 7
82: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
PICMG Version 2.1
Hot Swap State: M4 (Active), Previous: M3 (Activation In Process), Last State
Change Cause: Normal State Change (0x0)
82: FRU # 0
Entity: (0xa0, 0x60)
Hot Swap State: M4 (Active), Previous: M3 (Activation In Process), Last State
Change Cause: Normal State Change (0x0)
Device ID String: "Switch"
CLI>
boardreset <physical slot #>
boardreset will reset a board in a given physical slot #.
CLI> boardreset 9
Board 9 reset, status returned 0
deactivate <addr> <fru_id>
Deactivate the specified FRU. Instead of the IPMB bus address and FRU ID, a board, ShMM, power supply, or
fan tray ID may also be provided (see Help text for details).
CLI> deactivate 88 0
Command issued via IPMB, status = 0 (0x0)
Command executed successfully
shelf Display information about various shelf subsystems.
showunhealthy Show all unhealthy FRUs.
Table 3-1 ShMM Diagnostic Commands (Continued)
Command Function